Cảm biến tiệm cận Omron E2EW-QX6B3T12 5M

Thông số kỹ thuật cảm biến tiệm cận Omron E2EW-QX6B3T12 5M

• Type: Triple distance model/Spatter-resistant Triple distance model
• Size: M12
• Sensing distance: 6 mm ±10%
• Setting distance: 0 to 4.2 mm
• Differential travel: 15% max. of sensing distance
• Detectable object: Ferrous metals and non-ferrous metals (The sensing distance depends on the material of the sensing object. Refer to Engineering Data on catalog.)
• Standard sensing object (Iron): 18 × 18 × 1 mm
• Response frequency *1: 2 Hz (Equipped with a function, which effectively cancels pulse noise of current magnetic field.)
• Power supply voltage: 10 to 30 VDC (including 10% ripple (p-p)), Class 2
• Current consumption: 720 mW max. (Current consumption: 30 mA max. at power supply voltage of 24 V)
• Output configuration: B[] Models: PNP open collector, C[] Models: NPN open collector
• Operation mode: 1-output models (B1, C1): NO (Normally open),
  1-output models (B2, C2): NC (Normally closed),
  2-output models (B3, C3): NO+NC (Normally open, Normally closed)
• Control output Load
  current: 1-output models (B1,B2,C1,C2): 10 to 30 VDC, Class 2, 200 mA max.
  2-output models (B3, C3): 10 to 30 VDC, Class 2, 100 mA max.
• Control output Residual voltage: 1-output models (B1,B2,C1,C2): 2 V max. (Load current: 200 mA, Cable length: 2 m)
  2-output models (B3, C3): 2 V max. (Load current: 100 mA, Cable length: 2 m)
• Indicator: In the Standard I/O mode (SIO mode):
  Operation indicator (orange, lit) and communication indicator (green, not lit)
  In the IO-Link communication mode (COM mode):
  Operation indicator (orange, lit) and communication indicator (green, blinking at 1 s intervals)
• Protection circuits: Power supply reverse polarity protection, Surge suppressor, Output short-circuit protection, Output reverse polarity protection
• Ambient temperature
  range: Operating: 0 to 85 °C, Storage: -15 to 85 °C (with no icing or condensation) *3
• Ambient humidity range: Operating/Storage: 35% to 95% (with no condensation)
• Temperature influence: ±20% max. of sensing distance at 23 °C in the temperature range of 0 to 85 °C
• Voltage influence: ±1.5% max. of sensing distance at rated voltage in the rated voltage ±15% range
• Insulation resistance: 50 MΩ min. (at 500 VDC) between current-carrying parts and case
• Dielectric strength: 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case
• Vibration resistance
  (destruction): 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
• Shock resistance
  (destruction): 1,000 m/s 10 times each in X, Y, and Z directions
• Degree of protection: IEC 60529: IP67
• Connection method: Pre-wired Models (Standard cable length: 2 m),
  Pre-wired Connector Models (Standard cable length: 0.3 m),
  M12 Connector Models
• Weight (packed state) Pre-wired: Approx. 140 g
• Weight (packed state) M12 Pre-wired Smartclick Connector: Approx. 70 g
• Weight (packed state) M12 Connector: Approx. 60 g
• Materials Case: E2EW-X[]: Stainless steel (SUS303),
  E2EW-QX[]: Fluororesin coating (Base material: (SUS303))
• Materials Sensing surface: E2EW-X[]: Stainless steel (SUS303),
  E2EW-QX[]: Fluororesin coating (Base material: (SUS303))
• Materials Sensing surface (Thickness): 0.4 mm
• Materials Clamping
  nuts: E2EW-X[]: Stainless steel (SUS303),
  E2EW-QX[]: Fluororesin coating (Base material: (SUS303))
• Materials Toothed washers: Zinc-plated iron
• Materials Cable: Vinyl chloride (PVC)