Cảm biến tiệm cận Omron E2EQ-X12C118 5M

Thông số kỹ thuật cảm biến tiệm cận Omron E2EQ-X12C118 5M

• Sensing distance: 12 mm±10%
• Setting distance: 0 to 9.6 mm
• Differential travel: 15% max. of sensing distance
• Detectable object: Ferrous metals (For non-ferrous metals, refer to the Engineering Data on Catalog.)
• Standard sensing object (Iron): 36 × 36 × 1 mm
• Response frequency *1: 500 Hz
• Power supply voltage: 10 to 30 VDC (including 10% ripple (p-p)), Class 2
• Current consumption: 1-output models: 16 mA max., 2-output models: 20 mA max.
• Output configuration: B[] Models: PNP open collector, C[] Models: NPN open collector
• Operation mode (with sensing object approaching): 1-output models (B1, C1): NO (Normally open),
  1-output models (B2, C2): NC (Normally closed),
  2-output models (B3, C3): NO+NC (Normally open, Normally
  closed)
• Control
  output: 1-output models: 10 to 30 VDC, Class 2, 100 mA max.,,
  2-output models: 10 to 30 VDC, Class 2, 50 mA max.
• Control output Residual voltage: 1-output models: 2 V max. (Load current: 100 mA, Cable
  length: 2 m),
  2-output models: 2 V max. (Load current: 50 mA, Cable
  length: 2 m)
• Indicator *2: In the Standard I/O mode (SIO mode): Operation indicator (orange, lit) and
  communication indicator (green, not lit)
  In the IO-Link communication mode (COM mode): Operation indicator (orange, lit) and
  communication indicator (green, blinking at 1 s intervals)
• Protection circuits: Power supply reverse polarity protection, Surge suppressor, Output short-circuit
  protection, Output reverse polarity protection
• Ambient temperature range: Operating/Storage: -25 to 70°C (with no icing or condensation)
• Ambient humidity range: Operating/Storage: 35% to 95% (with no condensation)
• Temperature influence: ±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C
• Voltage influence: ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range
• Insulation resistance: 50 MΩ min. (at 500 VDC) between current-carrying parts and case
• Dielectric strength: 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case
• Vibration resistance (destruction): 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
• Shock resistance (destruction): 1,000 m/s 10 times each in X, Y, and Z directions
• Degree of protection: Pre-wired Models, Pre-wired Connector Models: IEC 60529: IP67, JIS C 0920 Annex 1:
  IP67G *4
  Connector Models: IEC 60529: IP67
• Connection method: Pre-wired Models (Standard cable length: 2 m) and Pre-wired Connector Models
  (Standard cable length: 0.3 m), M12 Connector Models
• Weight *3 (packed state) Pre-wired: Approx. 180 g
• Weight *3 (packed state) M12 Pre-wired Smartclick Connector: Approx. 115 g
• Weight *3 (packed state) Connector: Approx. 95 g
• Materials Case: Fluororesin coating (Base material: brass)
• Materials Sensing surface: Fluorine resin
• Materials Clamping nuts: Fluororesin coating (Base material: brass)
• Materials Toothed washers: Zinc-plated iron
• Materials Cable: Vinyl chloride (PVC)
• Main IO-Link functions *2: Operation mode switching between NO and NC, self diagnosis enabling, excessive
  proximity judgment distance selecting, timer function of the control output and timer time
  selecting, instability output (IO-Link mode) ON delay timer time selecting function,
  monitor output, operating hours read-out, readout of the sensor internal temperature,
  and initial reset
• IO-Link Communication
  specifications *2: Ver 1.1
• IO-Link Baud rate: COM2 (38.4 kbps), COM3 (230.4 kbps)
• IO-Link Data length: PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2)
• IO-Link Minimum cycle
  time: COM2: 2.3 ms, COM3: 0.4 ms