-13%
214B Flange Facing Kit – Manual 92-1987 P/N 05-1283
Còn 100 trong kho
This products is suitable for basic models:
- 214B BEVELMASTER
- 214B BEVELMASTER 110V
- 214B BEVELMASTER 220V
In addition, they are also suitable for some other models. Please check the technical documentation and user manual of the device you have. Or contact Tritool or Antek Vietnam Technology for technical support.
2
People watching this product now!
Phương thức thanh toán:
Mô tả
Other accessories
| 75-0115 | AIR CADDY (FRL) – MANUAL 92-0896 |
| 86-0339 | Optional Case |
| 05-0665 | Sleeve Mandrel Kit – Manual 92-1594 |
| 05-0666 | Sleeve Mandrel Kit – Manual 92-1594 |
| 05-1332 | Model 214B Single Point Kit – Manual 92-1501 |
| 05-1335 | Model 214B 3-Jaw Mandrel Head Kit – Manual 92-1501 |
| 86-0218 | Optional Case for Single Point Kit |
| 05-0178 | 214B Miter Mandrel Kit – Manual 92-1505 |
| 05-1336 | Model 214B Miter Mandrel Head Kit, 214B – Manual 92-0738 |
| 05-1283 | 214B Flange Facing Kit – Manual 92-1987 |
| 05-1282 | Elbow Mandrel Kit – Manual 92-1502 |
| 05-1329 | Elbow Mandrel Squaring Plate –Manual 92-1499 |
| 05-0154 | Elbow Mandrel Pointer Kit |
| 05-0357 | Adjustable Pin kit – Manual 92-1498 |
| 05-0182 | 214B ID Tracking Module (IDTM) Kit –Manual 92-1504 |
| DURABIT4 | Facing Bit, 1.00” Tall DURABIT4 (full range) |
| 99-0135 | Facing, 1.00” Tall (full face cuts) |
| DURABIT5 | 37 ½ DEG Bevel (4” to 12” pipe) |
| DURABIT6 | 37 ½ DEG Bevel (4” to 14” pipe) |
| 99-2906 | 37 ½ DEG Bevel (4” to 12”, plus sch. 40 & 80 14” pipe) |
| 99-3341 | 37 ½ DEG Bevel |
| 99-2908 | “C” Bore (4” pipe, Sch 160 max., 4:1 lead out) |
| 99-2909 | “C” Bore (5” to 14” pipe, 4:1 lead out) |
| 99-2911 | ID Chamfer Bit, 10 DEG (4” to 14” pipe, all Schedules) |
| 99-2912 | ID Chamfer Bit, 10 DEG (5” to 14” pipe, all Schedules) |
| 99-4520 | Facing |
| 99-0135 | Bevel 37.5 |
| 99-11437 | Flange Face, Inside, R.062 |
| 99-11438 | Flange Face, Outside, R.062 |
| 99-11439 | Flange Face-Bolt Pattern, R.062 |
| 99-11440 | Flange Face, Bolt Pattern, R.062 |
| 28-0175 | Shaft 28-0175 Seal (2 each) |
| 28-0176 | Extruded Seal, 3/16 X Bulk (70” inches) |
| 31-0092 | Key, 3/8 SqX1-7/8 Both Ends Rnd (4 each) |
| 33-0041 | Cap Screw, 1/4-20 X 7/8 (4 each) |
| 33-0057 | Cap Screw, 5/16-18 X 1-1/4 (4each) |
| 33-0518 | Set Screw, 5/16-18 X 3/4 Cup Pt. (17 each) |
| 40-0172 | Spring, Extension (4 each) |
| 53-0046 | Flow Control Valve, 1/2”Npt (1 each) |
| 54-0001 | Grease Fitting, 3/16 Dia. (2 each) |
| 91-0382 | Rotor Blades (10 each) |
| 75-0115 | AIR CADDY (FRL) – MANUAL 92-0896 |
| 05-1404 | Model 216B 3 Jaw Extension Kit |
| 05-1176 | Model 216B Miter Mandrel Head Kit |
| 05-1219 | Model 216 Miter Mandrel Extension Kit |
| 05-1391 | Model 216B Single Point Kit |
| 05-1390 | Model 216B ID Tracking Module Kit |
| 05-1389 | 216B Wrench Kit |
| 60-0114 | 216B Lathe Stand |
| 86-0386 | Metal Case |
| 99-0016 | Facing |
| 99-0009 | 37.5 DEG |
| 99-1075 | Bevel 10 DEG, step-cut (7.5” ID to 16.00” OD) |
| 99-3355 | Compound 37.5/10 DEG (7.5” ID to 16.0” OD) |
| 99-2090 | “C” Bore (7.50” ID to 16” OD, 4:1 lead out) |
| 99-1939 | “C” Bore (6.0” ID to 14.25” OD pipe, 4:1 lead out) |
| 30-4027 | Shim Insert New style tool holder (49-0368), and lock pin 32-0794 |
| 30-0554 | Triangular Insert, .031R |
| 75-0114 | AIR CADDY HD (FRL) – MANUAL 92-0919 |
| 60-0090 | Model 224B Floor Stand |
| 05-0347 | Model 224B ID Tracking Module – Manual 92-0834 |
| 82-0150 | Spring Hanger Assembly – Manual 92-0879 |
| 05-0345 | Model 224B Single Point Kit – Manual 92-0833 |
| 05-0346 | Model 224B Jaw Block Extension Kit – Manual 92-0763 |
| 05-0348 | Model 224B Miter Mandrel Head Kit– Manual 92-0839 |
| 05-0349 | Model 224B Miter Mandrel Extension Kit |
| 99-0016 | Facing |
| 99-0009 | 37.5 DEG |
| 99-2090 | Counterbore 4:1 (10.00”–24” ID) |
| 99-1939 | Counterbore 4:1 (8.50”-24” ID) |
| 30-1149 | Shim, Insert |
| 30-4027 | Shim, Insert |
| 30-0554 | Insert, .031R |
| 33-0106 | Cap Screw, 1/2-13 X 1-1/4 (2 each) |
| 33-0108 | Cap Screw, 1/2-13 X 1-3/4 (8 each) |
| 33-0530 | Set Screw, 3/8-16 X 5/8 Cup Pt. (10 each) |
| 33-0955 | Gib Screw (1 each) |
| 49-0060 | Tool Holder, RH (1 each) |
| 66-0079 | Tapered Gib, Mod (1 each) |
Thông tin bổ sung
| Brand | |
|---|---|
| Accessory |
Accessories |
Đánh giá (0)
Chỉ những khách hàng đã đăng nhập và đã mua sản phẩm này mới có thể để lại đánh giá.
Sản phẩm đã xem gần đây
Đánh giá
Clear filtersChưa có đánh giá nào.