Biến tần Spread SD320-0.75G3, công suất 0.75 KW, điện áp 340-440VAC 3-phase

SD320-0.75G3 là Biến tần vector bóng bán dẫn đơn vòng lặp mở, điện áp sử dụng 340-440VAC 3-phase, phù hợp động cơ có công suất 0.75 KW, dòng điện ra 2.1A. Biến tần SD320 series là biến tần đa năng được phát triển cho nhiều lĩnh vực, bao gồm nông nghiệp truyền thống, công nghiệp và sản xuất. Nó được ứng dụng rộng rãi trong các ngành công nghiệp như quạt, máy bơm, in ấn và đóng gói, vật liệu điện, luyện kim, hóa chất và phòng cháy chữa cháy đô thị. Dòng biến tần này có hiệu suất vượt trội, chức năng phong phú, cấu trúc nhỏ gọn, vận hành đơn giản, an toàn và tin cậy, và khả năng thích ứng tuyệt vời với các môi trường khác nhau.

3 People watching this product now!

Phương thức thanh toán:

payment-methods
Mô tả

Tính năng biến tần SD320-0.75G3

Nó được trang bị chức năng truyền động vector vòng hở, có khả năng xử lý các ứng dụng yêu cầu tốc độ thấp và mô-men xoắn cao. Nó có ống dẫn khí làm mát hoàn toàn kín, cung cấp khả năng chống chịu môi trường mạnh mẽ và hiệu suất tản nhiệt tuyệt vời. Nó bao gồm điều khiển V/F Nó cung cấp đầu ra mô-men xoắn cao và khả năng mạnh mẽ để khởi động có tải. Nó rất thân thiện với người dùng và phù hợp cho các ứng dụng đa tình huống (như máy bơm nước nhỏ thông minh, máy khắc, v.v.). Nó có các chức năng bảo vệ toàn diện, bao gồm bảo vệ mất pha đầu ra, bảo vệ quá dòng, bảo vệ quá áp, bảo vệ quá tải và bảo vệ quá nhiệt.

Thông tin chung Biến tần SD320-0.75G3

Basic Functions
Frequency 0.00Hz-400.00Hz
Carrier Frequency 2.0-16.0KHz
Frequency Setting Resolution Analog setting: 0.1% of the highest frequency, Digital setting:  0.01Hz
Control Modes V/F control, Open-loop vectro control
Speed Stability ±0.5%
Overload Capacity G-type machine: With reverse-time-limit overload protection, 115% for 6 minutes, 150% for 1  minute
V/F Curves Three modes: Linear, Quadratic, 1.5th power, 1.2nd power, User-defined V/F curve, V/F  Separation
Acceleration Curve Linear mode
DC Braking DC brake start frequency: 0.00% – upper limit frequency, Brake time: 0.0-60.0s; Brake current: 0.0-100% of motor’s   rated current.
Jog Control Jog frequency range: 0.0Hz – maximum frequency, Jog acceleration/deceleration time:  0.1-999.9s
Simple PLC and Multi-segment Speed Running Up to 7 segments of speed running
Build-in PID Capable of implementing closed-loop control system for process  control
Motor Parameter Identification Static identification
Overvoltage, Overcurrent, Stalling, and Over-Excitation Control Automatically limits current and voltage during operation, preventing frequent overcurrent, overvoltage, and   trips
Torque Boost and Slip Compensation Torque boost can be selected as automatic or manual, Slip compensation enhances low-speed loaded capacity and compensates   for
slip speed
Communication Function Not available
Braking Function Not available
Customizable Functions
Oscillation Suppression Enables oscillation suppression to eliminate oscillations and prevent overcurrent in the  inverter
PID Control Built-in PID controller for process control
Swing Frequency Function Outputs frequency, oscillating up and down around the set frequency, suitable for industries like textiles and chemical   fibers
Operating Functions Upper and lower frequency setting, frequency hopping operation, reverse operation limitation, frequency increment and decrement control, fault auto-recovery operation, and more.
Constant Pressure Water Supply Function Maintains constant water pressure and automatically sleeps and wakes up based on  pressure

Thông số kỹ thuật Biến tần SD320-0.75G3

  • Model: SD320-0.75G3
  • Series: SD320
  • Input voltage: 340-440VAC 3-phase
  • Motor power (KW): 0.75
  • Output voltage: 340-440VAC 3-phase
  • Rated Output Current (A): 2.1
  • EMC noise filter: No EMC filter
  • Protection Design: IP20
  • Environmental: Standard
Thông tin bổ sung
Brand

Series

SD320 Series

Input voltage

340-440VAC 3-phase

Motor power (KW)

0.75

EMC noise filter

No EMC filter

Protection Design

IP20

Environmental

Standard

Đánh giá (0)
0 reviews
0
0
0
0
0

Đánh giá

Clear filters

Chưa có đánh giá nào.

Chỉ những khách hàng đã đăng nhập và đã mua sản phẩm này mới có thể để lại đánh giá.

Sản phẩm đã xem gần đây